118 lines
3.1 KiB
Markdown
118 lines
3.1 KiB
Markdown
# Scripts
|
|
|
|
A collection of scripts for the GPD Win 3. Mostly to minimize the reuqired typing on the keyboard.
|
|
|
|
To install scripts, copy them somewhere on your Win 3, then add them to your path. This is done by adding a line to the end of `~/.bashrc`
|
|
|
|
### Quick install
|
|
|
|
To quickly install the scripts, paste this block into a terminal on your GPD Win 3:
|
|
|
|
```bash
|
|
if [ -z $(which git 2>/dev/null) ]; then
|
|
printf "\n$(tput setaf 1)-- We didn't find git! Is it installed? --$(tput sgr0)\n\n"
|
|
printf "On Ubuntu and similar distros, git can be installed with the following command:\n"
|
|
printf " $(tput setaf 2)sudo apt install git$(tput sgr0)\n\n"
|
|
printf "Please try again after installing git.\n\n"
|
|
else
|
|
printf "$(tput setaf 2)-- Installing scripts --$(tput sgr0)\n"
|
|
mkdir -p ~/.local
|
|
git clone https://gitea.quad.moe/quad/win3-resources.git ~/.local/gpd-win3
|
|
echo -e "\n# GPD Win 3 scripts\nPATH=\"\${PATH}:\${HOME}/.local/gpd-win3/scripts\"" >> ~/.bashrc
|
|
printf "$(tput setaf 2)-- Install finished. Please open a new terminal to use the scripts --$(tput sgr0)\n"
|
|
fi
|
|
```
|
|
|
|
To update, run:
|
|
|
|
```bash
|
|
gpd-script-update
|
|
```
|
|
|
|
### "Install" TDP manager
|
|
|
|
The TDP manager has a GUI. This can be installed into your application menu like other software by running the following command after installing this script collection:
|
|
|
|
```
|
|
tdp-gui-install
|
|
```
|
|
|
|
You should then find the TDP manager in your application menu like any other piece of software.
|
|
|
|
### Manual install
|
|
|
|
- Clone the repository somewhere
|
|
- Ensure the scripts folder is in your PATH
|
|
- (Optional) add `tdp check` to your .bashrc, which will display TDP every time you open a terminal
|
|
|
|
## TDP
|
|
|
|
Lets you easily set the TDP via the `intel_rapl` driver.
|
|
Also has a basic GUI available.
|
|
|
|
By default, PL2 (short-term peak) will be 2W higher than PL1.
|
|
|
|
For details on how to use, run `tdp help`.
|
|
|
|
Example commands:
|
|
|
|
```bash
|
|
# Print help
|
|
tdp help
|
|
|
|
# Launch GUI
|
|
tdp gui
|
|
|
|
# Check TDP
|
|
tdp check
|
|
|
|
# Set TDP to 8W
|
|
tdp set 8
|
|
|
|
# Set both PL1 and PL2 to 15W
|
|
tdp set 15 --same --detail
|
|
```
|
|
|
|
### Setting TDP at boot
|
|
|
|
Install the service using the following command: `cp ~/.local/gpd-win3/scripts/tdp-set.service /etc/systemd/system/`
|
|
|
|
Run `nano /etc/systemd/system/tdp-set.service` and edit the `ExecStart=` line so it points to the correct place and enter the TDP you want at the end:
|
|
|
|
```
|
|
ExecStart=/home/<username>/.local/gpd-win3/scripts/tdp set 12
|
|
```
|
|
|
|
Enable the service:
|
|
|
|
```bash
|
|
sudo systemctl deamon-reload
|
|
sudo systemctl enable tdp-set.service
|
|
```
|
|
|
|
Reboot your Win 3, then run `tdp check` to check that TDP was set correctly.
|
|
|
|
## Touch fix
|
|
|
|
The script `touch-fix` unloads, then loads the touchscreen modules needed by the Win 3. This makes the touchscreen work, but only until next reboot. Useful until a permanent fix is available.
|
|
|
|
Example commands:
|
|
|
|
```bash
|
|
# Reload touchscreen module
|
|
touch-fix
|
|
```
|
|
|
|
## GPD Prompt
|
|
|
|
This is a customized version of my bash prompt that adds a TDP display after the hostname:
|
|
|
|
|
|
|
|
This script collection must be installed for it to work.
|
|
To use it, open your `~/.bashrc` file and add the following line:
|
|
|
|
```
|
|
source gpd-prompt
|
|
```
|